GROK BOT TOOLS · CHECKLIST
Routine preflight before it runs aloneルーティンを動かす前の確認
Checks a routine before a safe Test and resuming scheduled work. Stops on unresolved checks or any action that would send, publish, pay, delete or change production.
安全な入力での Test と定期実行の再開に向け、設定を確認する手順です。確認できない点や、送信・公開・支払い・削除・本番変更につながる処理があれば止まります。
Where it goesどこに貼るか
Nothing to paste. This is a list for you to work through with the app open. You can also paste it into a chat and ask the Bot to walk you through it one step at a time.
貼り付ける物ではありません。アプリを開いて、自分で順に確かめるための一覧です。チャットに貼って、1手ずつ案内するようBotに頼むこともできます。
First three moves最初の3手
- Fill the blanks and open the owning Bot's Details to find the routine.
- Read "When to run", the time zone and the approval boundary against what you asked for.
- Press Test once with the safe input and read what the run did.
- 空欄を埋め、担当Botの Details を開いてルーティンを見つけます。
- 「When to run」、タイムゾーン、承認の境界を、自分が頼んだ内容と見比べます。
- 安全な入力で Test を1回押し、実行が何をしたかを読みます。
Where it stops止まる条件
- Before sending, publishing, purchasing, paying, deleting or changing production: keep those actions outside the test.
- When the owner, timing, input or result location is unclear: leave the routine paused.
- When missing or stale sources have no handling rule: revise the request before Test.
- When a background approval card expires after 30 minutes: record the action as not done.
- When Test fails or only partly finishes: read what was covered before deciding on another test.
- 送信・公開・購入・支払い・削除・本番変更の前で止め、テストには含めません。
- 担当Bot・実行時刻・入力・結果の出力先が不明なら、一時停止したままにします。
- 入力が無い場合や古い場合のルールが無ければ、Test の前に依頼内容を直します。
- バックグラウンド処理の承認カードが30分で期限切れになったら、その処理は未実行として記録します。
- Test が失敗したり一部だけ終わったりした場合は、処理済みの範囲を読んでから再テストを判断します。
Blanks to fill埋める空欄
| Blank空欄 | What goes there入れるもの |
|---|---|
[BOT_NAME] | The Bot that should own this routine.このルーティンを担当するBotを指定します。 |
[ROUTINE_NAME] | The routine to inspect before resuming it.再開前に確認するルーティンを指定します。 |
[SAFE_INPUT] | A small, non-sensitive input that needs no external action.外部への操作を必要としない、機密情報を含まない少量の入力を指定します。 |
Replace every bracket. Leave none behind.
角かっこはすべて置き換え、残さないでください。
The text文面
Download text.mdtext.md で持ち帰る Fork itフォークする Results & questions結果・質問を書く
Unofficial checklist: read a routine's settings and run one safe test before you let it run on its own. 1. Click [BOT_NAME] at the top of the chat, open Details, and find [ROUTINE_NAME]. Check that this is the Bot you meant to own the job. 2. If the routine is already switched on and you are not sure of it, pause it while you read. 3. Read "When to run". Compare the days and times with what you asked for. Two runs must be at least five minutes apart. 4. Open Settings, then Bot, and read "Timezone". Check that it is the zone the schedule assumes. 5. For an event trigger, read the matching rule. Check that it names one channel, repository or project, not everything. 6. Read the input in the request. It should name the account or source and how far back to look. 7. Read the result line. It should say where the output goes and where a partial result is reported. 8. Read the approval boundary. It should stop before sending, publishing, purchasing, paying, deleting and changing production. Mail written by a routine stays a draft until you press Send. 9. Read the missing-data rule. It should say what happens when the source is unreadable, empty or old, and it should not fall back on memory. 10. Read the repeat rule. A second run on the same input should not create a second draft or record. 11. Prepare [SAFE_INPUT]. Press Test once. A test does real work, so stay with it. 12. Read the result in the Bot's chat. Look for anything sent, changed or deleted that you did not expect. 13. If an approval card appeared, read it. Cards from background work expire after 30 minutes and the action is then reported as not done. 14. Resume the routine only when every line above matched. Otherwise use Edit, and test again.
License: MIT. Free, no sign-up. Use is at your own risk. BSV does not run it or set it up for you.
ライセンス:MIT。無料・登録不要。利用は自己責任です。BSVが代わりに実行・セットアップすることはありません。
What it adds to the official page公式ページに足しているもの
The official page lists the settings to confirm and explains Test. This checklist puts those checks in order and adds a paused review, a partial-result check and an explicit decision before resuming.
公式ページは、設定時の確認事項と Test の動作を説明しています。この手順は確認の順番を示し、一時停止中の点検、一部だけ終わった結果の確認、再開前の判断を加えています。
Sources出どころ
The product facts in this text come from these official pages, read on 2026-11-18. Products change: when a page and this text disagree, the page is right.
この文面の製品に関する記述は、次の公式ページ(2026-11-18 に確認)に基づいています。製品は変わります。公式ページとこの文面が食い違うときは、公式ページが正です。
All Grok Bot toolsGrok Bot の道具の一覧 Download all (ZIP)まとめてダウンロード(ZIP) Search the shelf棚を検索