Build your own chart tool
The seven-step path: pick one job, pick blocks, generate a starter, paste/import, verify, customize, publish honestly.
目的を1つ決める→ブロックを選ぶ→ひな形を生成→貼り付け→検証→改造→正直に公開、の7ステップ。
Recipes, blocks and a code generator for indicators, dashboards, scanners, alerts and your own web chart — with minimal coding.
インジケーター・ダッシュボード・スキャナー・アラート、そして自分のWebチャートまで。レシピ・ブロック・コード生成で、最小限のコーディングで作れます。
Everything here is ORIGINAL BSV source under the MIT license. Nothing has been runtime tested by BSV yet — each item says exactly what was checked.
ここにあるものはすべてBSVオリジナルのソース(MITライセンス)です。BSVではまだ実行検証をしていません。各項目に確認した範囲を明記しています。
Summaries are public. Viewing, copying and downloading the source need no sign-up.
解説は登録なしで読めます。コードの閲覧・コピー・ダウンロードも登録不要です。
Overlay, dashboard, scanner, alert, study or your own web chart. Start with one job you can verify — not twenty signals.
重ね表示・ダッシュボード・スキャナー・アラート・オシレーター・自作Webチャートから1つ。最初から20個のシグナルを入れず、検証できる1つから始めます。
A recipe is JSON: each block has an id, a type (for example indicator.ema, signal.cross, visual.table, alert.condition) and params. Later blocks refer to earlier ids.
レシピはJSONです。各ブロックにid・type(indicator.ema、signal.cross、visual.table、alert.conditionなど)・paramsがあり、後のブロックが前のidを参照します。
Run the generator for Pine v6, MQL5, MQL4, cTrader C#, cTrader Python, Bookmap Python, NinjaTrader 8 or Quantower — or take the pre-generated starters on each recipe page. Unsupported blocks remain as visible TODO comments.
ジェネレーターでPine v6・MQL5・MQL4・cTrader(C#/Python)・Bookmap(Python)・NinjaTrader 8・Quantower・Sierra Chart(ACSIL)・ProRealTime・GoCharting(Lipi)・MotiveWave(Java)・Vela(JavaScript)・JForex(Java)・TradeStation(EasyLanguage)・ATAS(C#)・AmiBroker(AFL)・thinkorswim(thinkScript)・Tradovate(JavaScript)・backtrader(Python)・Backtesting.py(Python)・NautilusTrader(Python)向けに出力します。各レシピのページにある生成済みのひな形も使えます。未対応のブロックはTODOコメントとして残ります。
TradingView: new Pine indicator → paste → save → add to chart. MT5 / MT4: MetaEditor custom indicator → compile. cTrader: Algo custom indicator (C# or Python) → build. Bookmap: load the Python add-on. Vela: your own browser chart.
TradingView:新規Pineインジケーターに貼り付けて保存しチャートに追加。MT5・MT4:MetaEditorでカスタムインジケーターとしてコンパイル。cTrader:Algoでカスタムインジケーター(C#またはPython)としてビルド。Bookmap:Pythonアドオンとして読み込み。Vela:自分のブラウザーチャート。
Check source/version, enough history, symbol and timezone assumptions, repainting/lookahead, session handling, alert frequency and edge-case parameters. A compile pass is not proof of trading value.
ソースとバージョン、十分な過去データ、銘柄・タイムゾーンの前提、リペイント・先読み、時間帯の扱い、アラートの頻度、極端なパラメーターを確認します。コンパイルが通っても売買の価値の証明にはなりません。
Swap EMA lengths, add higher-timeframe data, change thresholds, add ATR bands or a session gate, add webhook-ready alerts, split one big tool into an overlay + a scanner.
EMAの期間を変える、上位足のデータを足す、しきい値を変える、ATRバンドや時間帯の条件を足す、Webhookアラートを足す、大きなツールを重ね表示とスキャナーに分ける。
If you list the result on BSV, state original/adapted source, platform/version, prerequisites, what is tested, what is not, limitations — and no unsupported performance claims.
BSVに出品するなら、オリジナルか改変か、プラットフォームとバージョン、前提条件、検証済みの範囲と未検証の範囲、制約を書きます。根拠のない成績は書きません。
New · in your browser新着・ブラウザで動作
Edit blocks in a form and get Pine v6 / MQL5 / MQL4 / cTrader / Bookmap / NinjaTrader / Quantower starters instantly. Free, no sign-up.
ブロックをフォームで編集すると、Pine v6・MQL5・MQL4・cTrader・Bookmap・NinjaTrader・Quantowerのひな形がすぐ生成されます。無料・登録不要です。
The seven-step path: pick one job, pick blocks, generate a starter, paste/import, verify, customize, publish honestly.
目的を1つ決める→ブロックを選ぶ→ひな形を生成→貼り付け→検証→改造→正直に公開、の7ステップ。
JSON Schema for BSV Trader Recipes: a name, an overlay flag and an ordered list of blocks (id, type, params). Validate a recipe before generating code.
BSV Trader RecipeのJSONスキーマ。名前・チャート重ね表示の指定・ブロック(id・type・params)の並びを定義します。コード生成の前にレシピを検証できます。
Node.js generator that turns one recipe into a Pine Script v6, MQL5, MQL4, cTrader C#, cTrader Python, Bookmap Python, NinjaTrader 8, Quantower, Sierra Chart (ACSIL), ProRealTime, GoCharting (Lipi), MotiveWave (Java), Vela (JavaScript), JForex (Java), TradeStation (EasyLanguage), ATAS (C#), AmiBroker (AFL), thinkorswim (thinkScript), Tradovate (JavaScript), backtrader (Python), Backtesting.py (Python) or NautilusTrader (Python) starter. Unsupported blocks stay visible as TODO comments instead of silently disappearing.
1つのレシピからPine Script v6・MQL5・MQL4・cTrader(C#)・cTrader(Python)・Bookmap(Python)・NinjaTrader 8・Quantower・Sierra Chart(ACSIL)・ProRealTime・GoCharting(Lipi)・MotiveWave(Java)・Vela(JavaScript)・JForex(Java)・TradeStation(EasyLanguage)・ATAS(C#)・AmiBroker(AFL)・thinkorswim(thinkScript)・Tradovate(JavaScript)・backtrader(Python)・Backtesting.py(Python)・NautilusTrader(Python)のひな形を出力するNode.js製ジェネレーター。未対応のブロックは黙って消さず、TODOコメントとして残します。
Tracks the high, low and range of a chosen session (default 08:00–10:00 Europe/London) and shows them in a small status table.
指定した時間帯(初期値はロンドン時間08:00〜10:00)の高値・安値・値幅を追跡し、小さな表に表示します。
Marks bars that trade beyond the last confirmed pivot by at least a set ATR fraction and close back inside. A mechanical candidate marker with alert conditions — not an order-flow claim.
直近の確定ピボットをATR比で一定以上はみ出し、内側に戻って引けた足に印を付けます。アラート条件付きの機械的な候補表示で、注文フローの主張ではありません。
Plots ATR divided by its own moving average and colors low / normal / high volatility regimes against adjustable thresholds.
ATRをその移動平均で割った比率を表示し、しきい値に応じて低・通常・高ボラティリティを色分けします。
EMA basis with ATR-multiple bands for planning stop distance visually. It does not size positions or place orders.
EMAを基準にATR倍率のバンドを描き、損切り幅を目で検討するための補助です。ロット計算や発注は行いません。
Higher-timeframe fast/slow EMA trend and RSI state in a compact panel, using request.security with lookahead off.
上位足の短期・長期EMAのトレンドとRSIの状態を小さなパネルに表示します。request.securityはlookahead無効で使います。
EMA cross alerts that send a structured JSON payload via alert(). Webhook-ready, with no secrets in the script and no order placement.
EMAの交差でJSON形式のメッセージをalert()から送ります。Webhookにつなげられますが、スクリプトに秘密情報は入れず、発注もしません。
MQL5 custom indicator: EMA with ATR upper/lower bands in the chart window. Compile in MetaEditor before use.
MQL5のカスタムインジケーター。チャート上にEMAとATRの上下バンドを表示します。使う前にMetaEditorでコンパイルしてください。
cTrader Automate C# indicator: EMA with ATR bands, AccessRights.None. Build inside cTrader before use.
cTrader Automate用のC#インジケーター。EMAとATRバンドを表示します(AccessRights.None)。使う前にcTrader内でビルドしてください。
cTrader Automate C# RSI study in its own panel — a clean base for regime colouring or thresholds.
cTrader Automate用のC# RSIスタディ(別パネル表示)。局面の色分けやしきい値を足すための土台です。
MQL4 custom indicator for MT4: EMA with ATR upper/lower bands in the chart window. Compile in MetaEditor (MT4) before use.
MT4用のMQL4カスタムインジケーター。チャート上にEMAとATRの上下バンドを表示します。使う前にMT4のMetaEditorでコンパイルしてください。
cTrader Algo Python indicator: a C# attribute file for parameters/outputs plus a _main.py with the EMA + ATR band logic. Build in cTrader before use.
cTrader AlgoのPythonインジケーター。パラメーターと出力を宣言するC#属性ファイルと、EMA+ATRバンドの処理を書いた_main.pyの2ファイル構成です。使う前にcTraderでビルドしてください。
Bookmap Python API add-on (open beta API) that draws an EMA of trade prices on the main heatmap. No order placement.
Bookmap Python API(オープンベータ)のアドオン。約定価格のEMAをメインのヒートマップ上に描きます。注文は出しません。
NinjaScript indicator with EMA and ATR bands using the standard OnStateChange / OnBarUpdate / AddPlot lifecycle.
標準的なOnStateChange・OnBarUpdate・AddPlotの流れで作ったEMA+ATRバンドのNinjaScriptインジケーター。
Deliberately small Quantower Algo indicator (one SMA line series) to alter rather than an opaque clone.
あえて小さく作ったQuantower Algoのインジケーター(SMA 1本)。中身の見えない模倣品ではなく、改造の出発点です。
Sierra Chart ACSIL custom study: one EMA subgraph with a length input. Read-only and visual.
Sierra ChartのACSILカスタムスタディ。期間を入力できるEMAを1本表示します。表示専用です。
Dual EMA (21/89) written in GoCharting's Lipi scripting language. Paste into the Lipi editor and validate there.
GoChartingのLipi言語で書いた2本のEMA(21・89)。Lipiエディターに貼り付けて検証してください。
Five-line ProBuilder personal indicator returning EMA 21 and EMA 89. Separate from ProBackTest / ProOrder.
EMA21とEMA89を返す、数行のProBuilder個人用インジケーター。ProBackTest・ProOrderとは別物です。
MotiveWave Java SDK custom study starter (EMA, overlay). Study only — no order submission.
MotiveWave Java SDK用のカスタムスタディのひな形(EMA・チャート重ね表示)。スタディのみで発注はしません。
Your own browser chart: a minimal Vite + Vela starter that renders OHLCV bars you supply. No network request, no order execution. Vela itself is installed from its official package, not redistributed by BSV.
自分のブラウザーチャートを作る道。用意したOHLCVデータを表示する最小限のVite+Velaスターターです。通信も発注もしません。Vela本体はBSVが再配布せず、公式パッケージから入れます。
OpenMarkets as a market-data / agent integration building block (REST, WebSocket, MCP) — not a chart-scripting language. Start read-only and keep keys out of source.
OpenMarketsは市場データ・エージェント連携の部品(REST・WebSocket・MCP)として扱います。チャート用のスクリプト言語ではありません。読み取り専用から始め、APIキーをコードに入れないでください。
Fast/slow EMA trend state with RSI confirmation and alert.
短期・長期EMAのトレンド状態をRSIで確認し、アラートを出します。
Session filter plus EMA/RSI context. The initial generator emits a TODO where a target cannot express a session filter safely.
時間帯フィルターとEMA・RSIの組み合わせ。時間帯を安全に表現できない出力先ではTODOを残します。
ATR calculation with an EMA context line. Use the generated source as a starting point for stop/risk visualization; no profitability claim.
ATRとEMAの基準線。損切り・リスクを視覚化するひな形です。収益性の主張はしません。
Pivot/sweep concept with ATR context and a pivot zone. Rendered on targets that support pivots (including NinjaTrader, cTrader and MT4); other targets keep honest TODOs.
ピボット・スイープの考え方をATRと組み合わせたアラート。高度なブロックは正直に対応できるまでTODOのままです。
ATR plus moving-average context for a low/normal/high volatility regime tool.
ATRと移動平均で低・通常・高ボラティリティを分けるツール。
Session range, breakout state and dashboard starter.
時間帯の値幅・ブレイク状態・ダッシュボードのひな形。
Higher-timeframe EMA/RSI context with a compact status panel.
上位足のEMA・RSIの状態を小さなパネルで確認します。
Simple RSI threshold alert starter with explicit no-auto-trade behavior.
RSIのしきい値でアラートを出すだけのシンプルなひな形。自動売買はしません。
Uptrend state (EMA 21 above EMA 89), a real dip (RSI at or below 40 on one of the last 5 bars), then recovery: RSI crossing back above 45 on a closed bar.
上昇トレンド(EMA 21がEMA 89より上)のあいだに、直近5本のどこかでRSIが40以下まで下がり(本当の押し目)、確定足でRSIが45を上抜けた(回復)足を知らせます。
Session-aware range/statistics panel starter; advanced statistics remain target TODOs.
時間帯ごとの値幅・統計パネルのひな形。高度な統計はTODOです。
Pivot + RSI divergence concept for scanner implementation; advanced divergence logic remains explicit until target support is added.
ピボットとRSIのダイバージェンスを複数銘柄で探すスキャナーの構想。高度な判定は対応するまでTODOとして明示します。
Condition plus structured webhook payload starter. Never include secrets in the payload.
条件と構造化Webhookメッセージのひな形。メッセージに秘密情報を入れないでください。
SMA 50 / SMA 200 cross with one alert per closed bar in each direction. A classic context signal, not a trading system; no profitability claim.
SMA50とSMA200のクロスを、確定足ごとに上下それぞれ1回だけ知らせるひな形。定番の相場環境シグナルで、売買システムではありません。収益性の主張はしません。
EMA 9 / EMA 21 cross that only alerts when RSI 14 agrees (above 50 for up-crosses, below 50 for down-crosses). Starter for a filtered momentum alert; no profitability claim.
EMA9とEMA21のクロスのうち、RSI14が同じ向き(上抜けは50超、下抜けは50未満)のときだけ知らせるひな形。フィルター付きモメンタムアラートの出発点で、収益性の主張はしません。
No exact matches. Reset the filters.一致する項目がありません。絞り込みを解除してください。
Status is about the current BSV starter for each platform, not the platform itself. Never read it as Verified.
状態は各プラットフォーム向けのBSVスターターの現状であり、プラットフォーム自体の評価ではありません。検証済みという意味ではありません。
| Platform | Extensibility path | Current BSV asset | Status |
|---|---|---|---|
| TradingView | Pine Script | generator target + 6 copy/paste Pine starters | Source prepared; runtime compile still required. Since 2026-10-04 the generator output is checked by a BSV Pine-subset evaluator (`check_pine.mjs`, not TradingView; see the TradingView section) |
| MT5 | MQL5 | generator target (`mql5`: computes EMA/SMA/RSI/ATR, cross/threshold/combine, ranges, breakouts, plots, closed-bar alerts; checked in a BSV model of the MT5 API, see below) + EMA/ATR overlay source | Source prepared; runtime compile still required |
| cTrader | C# or Python custom indicators in cTrader Algo | C# and Python generator targets (both compute indicators, signals, plots and closed-bar alerts) + EMA/ATR (C# and Python) + RSI source | Source prepared; runtime build still required |
| Vela | JavaScript/TypeScript chart library + optional scripting engines | generator target (`vela`: a small BSV `ScriptingEngine` in plain JS, line series, signal markers, closed-bar alerts) + runnable custom web-chart starter | Generated starters for 7 recipes mounted without errors in headless Chrome against @luxalgo/vela 0.8.1 with synthetic bars (smoke test only); not tested with live data or by users |
| NinjaTrader | NinjaScript/C# | generator target (`ninjatrader`: built-in EMA/SMA/RSI/ATR, cross/threshold/combine, pivots/sweep/divergence/zones, plots, closed-bar `Alert()`, symbol scan) + EMA/ATR overlay source | Source prepared; runtime compile still required |
| Quantower | C# Quantower Algo | generator target (`quantower`: built-in indicators, cross/threshold/combine, line series, closed-bar log alerts) + simple SMA source | Source prepared; runtime compile still required |
| Sierra Chart | ACSIL/C++ | generator target (`sierra-acsil`: ACSIL moving averages/RSI/ATR, cross/threshold/combine, subgraphs, closed-bar `sc.AddAlertLine`) + EMA overlay custom-study source | Source prepared; runtime build still required |
| GoCharting | Lipi scripting | generator target (`gocharting-lipi`: talib indicators, cross/threshold/combine, plots, `alertcondition` + closed-bar `alert()`) + dual-EMA Lipi source | Source prepared; Lipi-editor validation still required |
| MT4 | MQL4 | generator target (`mql4`) + EMA/ATR overlay source | Source prepared; runtime compile still required |
| Bookmap | Python API (open beta) and Java add-ons/API | Python generator target (`bookmap-python`, time bars built from trades) + trade-EMA add-on source; order-flow blocks still planned | Source prepared; runtime test still required |
| MotiveWave | Java SDK | generator target (`motivewave`: `Study` with `DataSeries.ema/sma/atr`, Wilder RSI via `smma`, paths, closed-bar `ctx.signal`) + EMA custom-study source | Compiles with javac 21 against BSV stubs written from the SDK javadoc; real SDK build and MotiveWave load still required |
| JForex (Dukascopy) | JForex API (Java `IStrategy`) | generator target (`jforex`: `IIndicators.ema/sma/rsi/atr` at bar shifts, closed-bar `onBar`, console values and notifications; no `IEngine`/orders) | Compiles with javac 21 against BSV stubs written from the JForex API javadoc; JForex platform compile and demo run still required |
| TradeStation | EasyLanguage | generator target (`easylanguage`: indicator with `XAverage`/`Average`/`RSI`/`AvgTrueRange`, explicit cross comparisons, `PlotN`, `Alert` on `BarStatus(1) = 2`; no orders) | Structural check by BSV only (`check_easylanguage_output.mjs`); TradeStation Verify and chart test still required |
| ProRealTime | ProBuilder | generator target (`prorealtime`: built-in averages/RSI/ATR, `CROSSES OVER/UNDER`, `RETURN` lines, arrow markers on overlays) + dual-EMA copy/paste indicator | Source prepared; runtime validation required |
| ATAS | C# indicator API (`ATAS.Indicators`) | generator target (`atas`: `Indicator` with `OnCalculate`, `GetCandle`, `ValueDataSeries` lines, closed-bar `AddAlert`; EMA/SMA/RSI/ATR computed in the code; no orders) | Compiles with the .NET 8 C# compiler against BSV stubs written from the ATAS API reference; ATAS build and chart test still required |
| AmiBroker | AFL (AmiBroker Formula Language) | generator target (`amibroker`: indicator formula with `MA`/`EMA`/`RSIa`/`ATR`, explicit cross comparisons with `Ref`, `Plot`, completed-bar `AlertIf`; no `Buy`/`Sell`/`Short`/`Cover`) | Checked by a BSV AFL-subset parser/evaluator (`check_amibroker_afl.mjs`); AmiBroker verification still required |
| thinkorswim | thinkScript | generator target (`thinkscript`: study with `ExpAverage`/`Average`/`WildersAverage`/`TrueRange`, explicit cross comparisons, plots, `Alert(cond[1], …, Alert.BAR)`; no `AddOrder`) | Checked by a BSV thinkScript-subset parser/evaluator (`check_thinkscript.mjs`); thinkorswim verification still required |
| Tradovate | Custom indicators (JavaScript) | generator target (`tradovate`: `module.exports` indicator, `Calculator.init`/`map(d, index)`, EMA/SMA/RSI/ATR computed in the generated code, `predef.plotters.singleline`/`dots`, closed-bar alert dots via `shifts`; no orders, no network calls) | Checked by running the output in node:vm against a BSV stub of the documented API (`check_tradovate.mjs`); Tradovate verification still required |
| backtrader | Python library (backtesting / research) | generator target (`backtrader`: `bt.Indicator` with plot and alert lines, `bt.ind.EMA`/`SMA`/`RSI(safediv=True)`/`ATR`, `BsvAlerts` strategy printing ALERT lines on completed bars, `GenericCSVData` loader; no orders, no network calls) | Executed by BSV in the backtrader library (1.9.78.123) on synthetic bars (`check_backtrader.py`); not a broker or live-feed run, runtime verification still required |
| Backtesting.py | Python library (backtesting / research) | generator target (`backtesting-py`: alert-only `Strategy`, indicators and signals computed in `init()` with numpy from bars 0..i only, `next()` prints ALERT lines on completed bars, pandas CSV loader; no orders, no network calls) | Executed by BSV in the Backtesting.py library (0.6.6) on synthetic bars (`check_backtesting_py.py`); not a broker or live-feed run, runtime verification still required |
| NautilusTrader | Python library (backtesting / live framework, 1.x API) | generator target (`nautilus`: alert-only `Strategy` + frozen `StrategyConfig`, pure-Python EMA/SMA/RSI/ATR updated in `on_bar()` from bars 0..i, ALERT lines on completed bars, csv-module CSV loader, `BacktestEngine` on the test EUR/USD instrument; no orders, no network calls) | Executed by BSV in the NautilusTrader library (1.231.0) on synthetic bars (`check_nautilus.py`); not a broker, venue or live-feed run, runtime verification still required |
| OpenMarkets | REST/WebSocket/MCP data APIs, not a chart-script replacement | data/agent integration notes | API surface confirmed; no BSV runtime adapter yet |
| Target | How the panel is shown | What BSV checked | |
| backtrader | `stop()` prints `TABLE <title>` and one line per field for the last bar | executed in backtrader 1.9.78.123 on synthetic bars; values equal the shared Python reference (`check_backtrader.py`) | |
| Backtesting.py | `main()` prints the panels for the last bar from `stats._strategy` | executed in Backtesting.py 0.6.6; values equal the reference (`check_backtesting_py.py`) | |
| NautilusTrader | `run_backtest()` prints the panels after `engine.run()` | executed in NautilusTrader 1.231.0; values equal the reference (`check_nautilus.py`) | |
| thinkorswim | one `AddLabel` per field; `[1]` because labels use the last real (forming) bar | BSV thinkScript-subset evaluator: label text carries the closed bar's value (`check_thinkscript.mjs`); not thinkorswim | |
| AmiBroker | `printf` to the Interpretation window with `LastValue(Ref(x, -1))` and `NumToStr(…, 1.6, False)` | BSV AFL-subset evaluator: printed values for the last completed bar (`check_amibroker_afl.mjs`); not AmiBroker | |
| Tradovate | not drawn: the published custom-indicator API has no panel or label call, so the fields are kept in per-bar state (`this.bars[i - 1].T_<id>` = the bar that just closed) | BSV stub of the documented API in node:vm: every bar's field values equal the reference, unchanged by forming-bar updates, and a panel that reads the bar before is caught (`check_tradovate.mjs`); not Tradovate | |
| JForex | one console line per closed bar (shift 1), switch `logPanels` | compiles with javac 21 against the BSV JForex stubs only; not run |